Removing The Rear Wheel - MOTO GUZZI Stelvio 1200 4V Service Manual

Suspensions
•
Fit a new safety washer.
•
Screw the upper ring nut manually and then slightly tighten the clamps on the plate so as to
align notches on the ring nut.
Specific tooling
AP8140190 Tool for steering tightening
•
Rivet the tongues of the new safety washer.
•
Fit the fork upper plate on the stems.
Rear

Removing the rear wheel

•
Support the vehicle rear part using a
suitable stand.
•
Engage the first gear.
•
Undo and remove the four screws, col-
lect the spacers and the dust-protec-
tion ring.
•
Remove rear wheel.
SUSP - 212
STELVIO 4V - 1200