Chassis
3. T-shaped bushing
4. Rubber ring
5. Radiator support
6. TCEI screw
7. Clip
Removing
It is necessary to remove the oil sump guard in or-
der to change the engine oil and replace the oil
filter.
•
Operating from both sides, undo and
remove the two front screws (1).
•
Operating from both sides, undo and
remove the rear screw (2).
•
Remove the oil sump guard.
•
Place a collecting container and empty the lubrication system.
•
Unscrew and remove the two oil pipes
on the radiator.
•
Undo and remove the radiator lower
screw and collect the washer.
CHAS - 242
STELVIO 4V - 1200