MOTO GUZZI Stelvio 1200 4V Service Manual page 90

Engine from vehicle
•
Disconnect the engine oil pressure
sensor connector.
•
Disconnect the revolution sensor con-
nector.
•
Remove the fairing under the oil sump.
•
Support the vehicle with the engine
service stand.
•
Undo and remove the screws fixing the
centre stand plates.
•
Remove the centre stand.
•
Working on both sides, unscrew and
remove the front screw and collect the
washer.
ENG VE - 90
STELVIO 4V - 1200