Suspensions
•
Secure the rear part of the vehicle through belts in order to lift the front wheel.
•
Remove the mudguard.
•
Remove the front wheel.
•
Support the stanchion and loosen the
screws on the upper and then the lower
plate.
•
Remove the stanchion.
See also
Removing the
front wheel
Draining oil
•
Lock the sleeve in a vice with the spe-
cific tool (code AP8140149).
•
Set the minimum spring preloading.
Specific tooling
AP8140149 Protection for fitting operations
SUSP - 196
STELVIO 4V - 1200