MOTO GUZZI Stelvio 1200 4V Service Manual page 19

STELVIO 4V - 1200
Left - right fairings retainer - M6 (3+3)
Retroreflector to support retainer
Retroreflector support to license plate holder retainer
License plate holder and light reinforcing retainer - M5 (1)
Cases support retainer - M6 (2)
Cases support retainer - M8 (2+2)
Passenger grab handle to chassis retainer - M8 (2)
Passenger grab handle to chassis retainer - M6 (4)
License plate holder to chassis retainer - M5 (4)
Luggage carrier brackets retainer - M8 (2+2)
Ignition lock retainer - shear head screw
Overhaul data
Assembly clearances
Cylinder - piston assy.
Measurement of the cylinder diameter must be done at three heights, turning the dial gauge 90°.
Check that cylinders and pistons are of the same selection types (D, E, F).
Check clearance between cylinders and pistons on the selected diameter; if it exceeds the value speci-
fied, it is necessary to replace cylinders and pistons.
The pistons of an engine must be balanced; a weight difference of up to 1.5 g (0.0033 lb) is allowed.
Specification
Piston diameter - selection D
Cylinder diameter - selection D
Piston diameter - selection E
Cylinder diameter - selection E
Piston diameter - selection F
Cylinder diameter - selection F
REAR BODYWORK
Name
FINISHINGS
Name
PISTON - CYLINDER SELECTION TYPES
Torque in Nm
10 Nm (7.38 lbf ft)
4 Nm
4 Nm
4 Nm (2.95 lbf ft)
10 Nm (7.38 lbf ft)
25 Nm (18.44 lbf ft)
25 Nm (18.44 lbf ft)
10 Nm (7.38 lbf ft)
4 Nm (2.95 lbf ft)
25 Nm (18.44 lbf ft)
Torque in Nm
- Nm
Desc./Quantity
94.935 - 94.945 mm (3.73759 - 3.73798 in)
95.000 - 95.010 mm (3.74015 - 3.74054 in)
94.945 - 94.955 mm (3.73798 - 3.73837 in)
95.010 - 95.020 mm (3.74054 - 3.74093 in)
94.955 - 94.965 mm (3.73837 - 3.73877 in)
95.020 - 95.030 mm (3.74093 - 3.74133 in)
Characteristics
CHAR - 19