Table of Contents
Advertisement
STELVIO 4V - 1200
Installing
•
Insert the transmission casing on the
swingarm making sure that the univer-
sal joint engages correctly.
•
Tighten the four screws to the prescri-
bed torque operating diagonally.
•
Place the reaction rod into its seat.
•
Insert the screw.
•
Screw the nut fixing the reaction rod.
•
Place the dust-protection ring between
the rim and the cardan shaft taking
care to mount it with the collar facing
the transmission unit.
Chassis
CHAS - 237
Advertisement
Table of Contents
