Suspensions
•
Fit the dust guard with the specific tool.
Specific tooling
AP8140758 tool to fit oil seals and dust gaiter
for ø 50 mm (1.97 in) stems
AP8140146 Weight
•
Insert the pumping member in the
sleeve.
•
Tighten the screw fixing the pumping
member on the fork end to the prescri-
bed torque.
Filling oil
•
Place the sleeve upright in a vice fitted
with protection shoes.
•
Compress the sleeve in the stem.
Place a support under the stem in order
to leave it compressed.
•
Pour part of the fork oil into the sleeve.
•
Wait some minutes until the oil fills all
the ducts.
•
Pour the remaining oil.
•
Pump out oil a few times.
SUSP - 206
STELVIO 4V - 1200