STELVIO 4V - 1200
•
Fit a new oil filter by tightening it to the
prescribed torque.
•
Place a new gasket between the flange
and the sump.
•
Place the oil sump.
•
Tighten the fourteen screws to the pre-
scribed torque.
•
Add engine oil up to the correct level.
Removing the oil sump
NOTE
TO REMOVE THE OIL SUMP, PLACE A SUITABLE CONTAINER UNDER IT TO COLLECT THE
USED OIL AND DRAIN OUT ALL OIL.
•
If necessary, the filter can be removed with the suitable special tool.
Specific tooling
01.92.91.00 Wrench for removing the cover on sump and filter
Engine
ENG - 177