Maintenance; Replacing The Battery; Cleaning - AEMC CA846 User Manual

Use only factory specied replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.
5.1
The
Replace with a standard 9V battery (NEDA 1604, IEC 6F22).
To replace the battery:
• Turn the Thermo-Hygrometer OFF.
• Remove the rubber holster.
• Remove the screw from the back of the meter and lift off the battery
cover.
• Replace the battery, then put the rear cover and holster back on.
5.2
•
•
•
•
Thermo-Hygrometer Model CA846
Find Quality Products Online at:

MAINTENANCE

Replacing the Battery

symbol appears on the LCD display when replacement is needed.

Cleaning

Use a soft cloth lightly dampened with soapy water.
Rinse with a damp cloth and then dry with a dry cloth.
Do not use any abrasives or solvents.
Do not let any liquid enter the case or sensor area.
GlobalTestSupply
www.
CHAPTER 5
.com
® will not be held
9
sales@GlobalTestSupply.com