System Setpassword - THOMSON SpeedTouch 608 Cli Reference Manual

system setpassword

Set/change the current SpeedTouch™ system password.
To avoid unrestricted and unauthorized access to the SpeedTouch™, it is highly recommended to make sure
Note
the SpeedTouch™ is protected by a system password (via the command system setpassword) and to change
the password on a regular basis
SYNTAX:
system setpassword
where:
userid
password
EXAMPLE:
=>system setpassword password=Sascha
Security notification: Password changed, use 'saveall' to make it permanent.
=>saveall
=>
RELATED COMMANDS:
system clearpassword
E-DOC-CTC-20040216-0002 v1.0
[userid = <string>]
password = <password>
The new access userid.
The new access password.
Clear current system password.
System Commands
OPTIONAL
REQUIRED
449