Dhcp Relay Ifconfig - THOMSON SpeedTouch 608 Cli Reference Manual

dhcp relay ifconfig

Configure a relay interface.
SYNTAX:
dhcp relay ifconfig
where:
intf
relay
maxhops
remoteid
trusted
EXAMPLE:
=>dhcp relay ifconfig
intf = pppoa_pppoa
[relay] = off
[maxhops] = 4
[remoteid] =
[trusted] = no
=>
RELATED COMMANDS:
dhcp relay config
dhcp relay iflist
E-DOC-CTC-20040216-0002 v1.0
intf = <interface name>
[relay = <{off|on}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{no|yes}>]
The name of the dynamic interface to be configured.
Sets the relay status.
A number between 0 and 16.
Represents the maximum number of hops allowed in the DHCP
packet.
The default is 4.
Sets the remote id as specified in RFC3046.
Drop/Forward DHCP request packet when the DHCP Relay Agent
Option is enabled (with the command dhcp relay config agentinfo=on)
and the giaddr field is 0 (RFC3046).
Set the relay configuration settings.
Show all dynamic interfaces.
DHCP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
103