Snmp Config - THOMSON SpeedTouch 608 Cli Reference Manual

SNMP Commands

snmp config

Show/set global Simple Network Management Protocol (SNMP) parameters.
SYNTAX:
snmp config
where:
RWCommunity
ROCommunity
sysContact
sysName
sysLocation
EXAMPLE (default configuration):
=>snmp config
Read-write SNMP community name
Read-only SNMP community name
SNMP System Contact
SNMP System Name
SNMP System Location
=>
416
[RWCommunity = <string>]
[ROCommunity = <string>]
[sysContact = <quoted string>]
[sysName = <quoted string>]
[sysLocation = <quoted string>]
The read-write community name.
The default is private.
The read-only community name.
The default is public.
The SNMP system contact.
The default is Service Provider.
The SNMP system name.
The default is SpeedTouch.
The SNMP system location.
The default is Customer Premises.
: private
: public
: Service Provider
: SpeedTouch 610
: Customer Premises
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0