Dhcp Server Pool Config - THOMSON SpeedTouch 608 Cli Reference Manual

dhcp server pool config

Configure an existing DHCP server pool. Before you are able to configure the DHCP server pool, you must create it
via the command dhcp server pool add.
SYNTAX:
dhcp server pool config
where:
name
index
intf
poolstart
poolend
netmask
gateway
E-DOC-CTC-20040216-0002 v1.0
name = <string>
[index = <number>]
[intf = <string>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[gateway = <ipaddress | 0>]
[server = <ipaddress | 0>]
[primdns = <ipaddress | 0>]
[secdns = <ipaddress | 0>]
[dnsmetric = <number{0-100}>]
[primwins = <ipaddress | 0>]
[secwins = <ipaddress | 0>]
[leasetime = <number>]
[unnumbered = <{no|yes}>]
[localgw = <{off|on}>]
The name of the DHCP server pool to configure.
A number between 0 (highest priority) and the highest number
(lowest priority) found in the list of existing DHCP server pools.
Represents a (higher) priority for the DHCP server pool.
The interface for which the pool is allowed to lease IP addresses.
The lowest IP address in the DHCP address range to use for leasing.
Default value of this parameter is 0.0.0.0 (not specified), which
means that the lowest IP address of the pool will be defined by the
remote server via Internet Protocol Control Protocol (IPCP) as
soon as the Point-to-Point Protocol (PPP) IPCP subnetmasking
connection is established.
The highest IP address in the DHCP address range to use for leasing.
Default value of this parameter is 0.0.0.0 (not specified), which
means that the highest IP address of the pool will be defined by the
remote server via IPCP as soon as the PPP IPCP subnetmasking
connection is established.
The applicable netmask for the DHCP leases.
The IP address of the default gateway for the DHCP clients.
Default value of this parameter is 0 (not specified), which means that
the gateway IP address will be communicated by the remote server
as soon as the PPP IPCP subnetmasking connection is established or
that the SpeedTouch™ acts as the LAN default gateway.
DHCP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
119