Bridge Iflist - THOMSON SpeedTouch 608 Cli Reference Manual

Bridge Commands

bridge iflist

Show the current state of all or the selected bridge interfaces.
SYNTAX:
bridge iflist
where:
intf
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes:
TX bytes:
ethport1 : Internal
Connection State: connected
Port: ethport1
RX bytes:
TX bytes:
TestBridge: dest : TestBridge
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 83
TX bytes: 30740
=>
DESCRIPTION:
RX bytes
TX bytes
OBC
60
[intf = <intfname>]
The name of the bridge interface for which the configuration must be
shown.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
If no interface is specified, all bridge interfaces are shown.
PortNr: 0 PortState: forwarding
75783 frames: 572
82843610 frames: 341554
PortNr: 1 PortState: forwarding
156472129 frames: 5903256
75689 frames: 425
QoS : default Encaps : llc/snap
PortNr: 5 PortState: forwarding
frames: 13
frames: 341554
The number of Received bytes.
The number of Transmitted bytes.
On Board Controller: indicates the physical bridge port.
dropframes: 0
dropframes: 5561702
Fcs : off
dropframes: 0
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0