Ipsec Policy Unassign - THOMSON SpeedTouch 608 Cli Reference Manual

IPSec Commands

ipsec policy unassign

Unassign all chains from a hook.
SYNTAX:
ipsec policy unassign
where:
hook
RELATED COMMANDS:
ipsec policy assign
ipsec policy flush
ipsec policy list
290
hook = <{input|output}>
The hook's name to unassign all chain from.
Choose between:
•
input :
The point off incoming traffic.
At this point it can be determined whether the packet is
allowed to reach the SpeedTouch™ IP router or local host.
•
output :
The point all outgoing traffic.
At this point it can be determined whether the packet is
allowed to leave the SpeedTouch™ IP router or local host.
Assign a chain to a hook.
Clear all hooks.
Show a list of all chain assignments.
REQUIRED
E-DOC-CTC-20040216-0002 v1.0