Bridge Ifattach - THOMSON SpeedTouch 608 Cli Reference Manual

bridge ifattach

Attach (i.e. connect) a bridged Ethernet interface.
SYNTAX:
bridge ifattach
where:
intf
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes:
TX bytes:
ethport1 : Internal
Connection State: connected
Port: ethport1
RX bytes:
TX bytes:
TestBridge: dest : (none)
Retry : 10
Connection State: not-connected
Port: (Unassigned)
=>bridge ifattach intf=TestBridge
=>bridge iflist
OBC : Internal
Connection State: connected
...
TestBridge: dest : TestBridge
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 0
TX bytes: 0
=>
E-DOC-CTC-20040216-0002 v1.0
intf = <intfname>
The name of the interface to attach.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
PortNr: 0 PortState: forwarding
75783 frames: 572
82843610 frames: 341554
PortNr: 1 PortState: forwarding
156472129 frames: 5903256
75689 frames: 425
QoS : default Encaps : llc/snap
PortNr: (Unknown)
Port: OBC
QoS : default Encaps : llc/snap
PortNr: 5 PortState: forwarding
frames: 0
frames: 0
dropframes: 0
dropframes: 5561702
Fcs : off
PortState: forwarding
PortState: forwarding
Fcs : off
dropframes: 0
Bridge Commands
REQUIRED
55