Pppoa Ifdetach - THOMSON SpeedTouch 608 Cli Reference Manual

pppoa ifdetach

Detach a PPPoA interface.
SYNTAX:
pppoa ifdetach
where:
intf
EXAMPLE:
=>pppoa iflist
PPPoA_1: dest : PVC_1
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=0.0.0.0/0 (metric 1)
auth = auto user = johndoe
admin state = up
LCP : state = starting
IPCP: state = initial
=>pppoa ifdetach intf=PPPoA_1
=>pppoa iflist
=>pppoa iflist
PPPoA_1: dest : PVC_1
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=0.0.0.0/0 (metric 1)
auth = auto user = johndoe
admin state = up
LCP : state = starting
IPCP: state = initial
=>
RELATED COMMANDS:
pppoa ifadd
pppoa ifattach
pppoa ifconfig
pppoa ifdelete
pppoa iflist
E-DOC-CTC-20040216-0002 v1.0
intf = <intfname>
The name of the PPPoA interface to be detached.
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = up
retransm = 1
retransm = 0
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = down
retransm = 1
retransm = 0
Create a new PPPoA interface.
Attach a PPPoA interface.
Configure a PPPoA interface.
Delete a PPPoA interface.
Show current PPPoA configuration.
link state = connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
PPPoA Commands
REQUIRED
365