CLI Navigation
Accessing the Command Line Interface
Users can access the Command Line Interface via:
•
The SpeedTouch™ CLI web pages:
This requires that TCP/IP connectivity exists between the host from which the web browser is opened and the
SpeedTouch™.
•
A Telnet session:
This requires that TCP/IP connectivity exists between the host from which the Telnet session is opened and the
SpeedTouch™.
•
The serial 'Console' interface.
•
Quote site commands (over FTP).
Access via the CLI Web Pages
Proceed as follows to access the SpeedTouch™ CLI via its web interface:
•
Browse to the SpeedTouch™ web pages.
•
Click Advanced > CLI in the left frame. The CLI web menu opens:
All CLI groups and commands are placed in a menu:
•
To open a command group, do one of the following:
•
click the
mark next to a group name.
•
click the group name.
•
Click on a command name to open the command:
•
Commands without parameters are indicated with
•
Commands which require additional parameters are indicated with
•
After you have configured all parameters, click Apply to execute the command.
20
and are executed immediately.
.
E-DOC-CTC-20040216-0002 v1.0