Basic Navigation And Manipulation - THOMSON SpeedTouch 608 Cli Reference Manual

CLI Navigation

Basic Navigation and Manipulation

Manipulation commands are commands that manipulate operations on the command line, for example changing the
command group, go to the beginning of the command line, go to the end of the command line, etc.
Command group navigation
From top level, you can change to a command group by executing the name of the desired command group.
To obtain a list of all available command groups, execute help from the top level.
The example below shows every possible CLI command group for the SpeedTouch™608 ADSL/POTS variant:
=>help
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
Following command groups are available :
adsl atm
config dhcp
ethoa firewall
ipsec label
pppoa pppoe
snmp sntp
td upnp
=>
The following command groups are specific for certain variants:
•
atmf is only applicable for models equipped with an ATMF-25.6Mb/s port
To return to top level, or to go up one level (in case of nested command groups), enter .. at the prompt.
Example:
=>phonebook
[phonebook]=>
[phonebook]=>..
=>
22
autopvc bridge
dns env
ip ipoa
language nat
pptp qosbook
software system
cip
eth
ipqos
phonebook
script
systemlog
E-DOC-CTC-20040216-0002 v1.0