Nat Flush - THOMSON SpeedTouch 608 Cli Reference Manual

nat flush

Flush complete NAT/PAT configuration.
The flush command does not impact previously saved configurations.
Note
SYNTAX:
nat flush
RELATED COMMANDS:
nat create
nat delete
nat disable
nat enable
E-DOC-CTC-20040216-0002 v1.0
Create a static NAT/PAT entry.
Delete a static NAT/PAT entry.
Disable NAT/PAT on a SpeedTouch™ IP address.
Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
NAT Commands
341