Table of Contents
Advertisement
Chapter 1: Connections and Setup
System Overview
The Wireless Cable Gateway is connected between your cable company and the PCs within your
home, as pictured previously in the Wireless Cable Gateway Overview. The connection to the cable
company is made by a coaxial cable, and is referred to as the WAN (Wide Area Network) side of
your Wireless Cable Gateway. The connections to your PCs are made by your choice of several
standard home networking methods: Ethernet, USB, or 802.11b Wireless, and are referred to as the
LAN (Local Area Network) side of your Wireless Cable Gateway. Multiple PCs can use any or all of
the LAN side connections simultaneously to share your single cable company connection, up to a
maximum of 254 PCs total.
Unlike a simple hub or switch, the gateway's setup consists of more than simply plugging
hardware together. You'll need to confi gure your networked PCs to accept the IP addresses the
gateway assigns them (if applicable), and you will also need to confi gure the gateway with
settings provided by your cable company.
Understanding the Wireless Cable Gateway
Connections
Fig. 1
8
Chapter 1
Advertisement
Table of Contents
