Ipoa Ifadd - THOMSON SpeedTouch 608 Cli Reference Manual

ipoa ifadd

Create a new IPoA interface.
SYNTAX:
ipoa ifadd
where:
intf
dest
EXAMPLE:
=>ipoa iflist
IPoA_1 : dest : IPoA_1
Retry : 10
Connection State : connected
=>phonebook list
Name Type Use
IPoA_1 ipoa 1
IPoA_2 ipoa 0
=>ipoa ifadd dest=IPoA_2
=>ipoa iflist
IPoA_1 : dest : IPoA_1
Retry : 10
Connection State : connected
IPoA_2 : dest : IPoA_2
Retry : 10
Connection State : not-connected
=>
RELATED COMMANDS:
ipoa flush
ipoa ifattach
ipoa ifconfig
ipoa ifdelete
ipoa ifdetach
ipoa iflist
E-DOC-CTC-20040216-0002 v1.0
[intf = <string>]
[dest = <phonebook entry>]
The name for the new IPoA interface.
If not specified, the destination will double as interface name.
The destination for the new IPoA interface.
Typically, a phonebook entry.
QoS : default
Address
8.35
8.36
QoS : default
QoS : default
Flush complete IPoA configuration.
Attach (i.e. connect) an IPoA interface.
Configure an IPoA interface.
Delete an IPoA interface.
Detach an IPoA interface.
Show current IPoA interfaces.
Encaps : llc/snap
Encaps : llc/snap
Encaps : llc/snap
IPoA Commands
OPTIONAL
OPTIONAL
Fcs : off
Fcs : off
Fcs : off
225