Bridge Ifadd - THOMSON SpeedTouch 608 Cli Reference Manual

Bridge Commands

bridge ifadd

Create a bridged Ethernet interface.
SYNTAX:
bridge ifadd
where:
intf
dest
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes:
TX bytes:
ethport1 : Internal
Connection State: connected
Port: ethport1
RX bytes:
TX bytes:
=>bridge ifadd intf=TestBridge
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes:
TX bytes:
...
TestBridge: dest : (none)
Retry : 10
Connection State: not-connected
Port: (Unassigned)
=>
54
[intf = <intfname>]
[dest = <string>]
The bridged Ethernet interface name.
If not specified, the destination name will double as interface name.
The destination address for the new interface.
Typically a phonebook entry. Browse through the available entries via
the ARROW UP and ARROW DOWN keys.
PortNr: 0 PortState: forwarding
75783 frames: 572
82843610 frames: 341554
PortNr: 1 PortState: forwarding
156472129 frames: 5903256
75689 frames: 425
PortNr: 0 PortState: forwarding
75783 frames: 572
82843610 frames: 341554
QoS : default Encaps : llc/snap
PortNr: (Unknown)
dropframes: 0
dropframes: 5561702
dropframes: 0
Fcs : off
PortState: forwarding
OPTIONAL
OPTIONAL
E-DOC-CTC-20040216-0002 v1.0