Config Load - THOMSON SpeedTouch 608 Cli Reference Manual

config load

Load complete saved (backup) or default configuration file.
Use the command config flush before using the command config load.
Note
SYNTAX:
config load
where:
load_ip
defaults
flush
echo
filename
EXAMPLE:
=>ip rtlist
Destination
10.0.0.0/24
172.16.0.5/32
10.0.0.140/32
127.0.0.1/32
172.16.0.0/24
=>config flush flush_ip=no
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>config load flush=yes
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
172.16.0.5/32
127.0.0.1/32
172.16.0.0/24
=>
E-DOC-CTC-20040216-0002 v1.0
[load_ip = <{no|yes}>]
[defaults = <{yes|no}>]
[flush = <{yes|no}>]
[echo = <{no|yes}>]
[filename = <string>]
Load IP settings (yes) or not (no).
Not keeping the IP settings could cause lost IP connectivity in
Note
the LAN.
Load default configuration (yes) or saved configuration (no).
If this parameter is not specified, the saved configuration will
Note
be loaded.
Flush the current configuration before loading a new configuration (yes)
or not (no).
Echo each command string when loaded (yes) or not (no).
Configuration filename.
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
Intf Mtrc
eth0 0
eth0 0
cip1 0
loop 0
cip1 1
Config Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
79