Software Switch - THOMSON SpeedTouch 608 Cli Reference Manual

Software Commands

software switch

Switch active and passive versions and reboot the SpeedTouch™.
Because rebooting implies a flush of all non-saved configurations it is highly recommended to save the current configu-
ration if needed, e.g. via saveall or :config save before executing a software switch.
SYNTAX:
software switch
EXAMPLE:
=>software version
Active SW : ZZZ2AA4.278
Passive SW : ZZZ2AA4.279
=>software switch
.....
(after reboot and re-opening the Telnet session)
.....
=>software version
Active SW : ZZZ2AA4.279
Passive SW : ZZZ2AA4.278
=>
RELATED COMMANDS:
software version
system reboot
432
Show active and passive software versions.
Reboot the SpeedTouch™.
E-DOC-CTC-20040216-0002 v1.0