Ipsec Config - THOMSON SpeedTouch 608 Cli Reference Manual

ipsec config

Show/set global IP Security (IPSec)/Virtual Private Networking (VPN) configuration.
SYNTAX:
ipsec config
where:
state
trace
natdetection
E-DOC-CTC-20040216-0002 v1.0
[state = <{disabled|enabled}>]
[trace = <[+/-]flag[+/-flag...]{policy oakley_quick
isakmp oakley_state oakley_establish ctrl_channel all}>]
[natdetection = <{disabled|enabled}>]
Enable or disable IPSec/VPN operation and processing.
The default is disabled.
Enable/disable module traces.
The default is disabled.
Enable or disable NAT detection.
The default is disabled.
IPSec Commands
OPTIONAL
OPTIONAL
OPTIONAL
245