Pppoa Ifadd - THOMSON SpeedTouch 608 Cli Reference Manual

pppoa ifadd

Create a new PPPoA interface.
SYNTAX:
pppoa ifadd
where:
intf
dest
EXAMPLE:
=>pppoa iflist
pppoa: dest : pppoa
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto user = johndoe@ISP
admin state = up
LCP : state = starting
IPCP: state = initial
=>pppoa ifadd intf=pppoa2 dest=pppoa2
=>pppoa iflist
pppoa: dest : pppoa
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto user = johndoe@ISP
admin state = up
LCP : state = starting
IPCP: state = initial
pppoa2: dest : pppoa2
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
=>
E-DOC-CTC-20040216-0002 v1.0
[intf = <string>]
[dest = <phonebook entry>]
The name for the new PPP interface.
If not specified, the destination will double as interface name.
The ATM channel to be used for this PPP interface.
Typically, an phonebook entry.
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = up
retransm = 1
retransm = 0
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = up
retransm = 1
retransm = 0
[00:00:00]
encaps VC-MUX
mru = 1500
password =
oper state = down
retransm = 10
retransm = 0
link state = connected
term. reason =
term. reason =
link state = connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
PPPoA Commands
OPTIONAL
OPTIONAL
357