Switch Mirror Capture - THOMSON SpeedTouch 608 Cli Reference Manual

switch mirror capture

Define the specified port to be the Mirror Capture Port.
Only one port can be the Mirror Capture Port at any one time.
Note
SYNTAX:
switch mirror capture
where:
port
EXAMPLE:
=>switch mirror capture port=2
=>switch mirror capture
Mirror capture port = 2
RELATED COMMANDS:
switch mirror egress
switch mirror ingress
E-DOC-CTC-20040216-0002 v1.0
port = <number{1-4}>
The port to be the Mirror Capture Port.
If no port number is specified, then the port number of the Mirror
Capture Port is shown.
Enable or disable the specified port to be a Transmitted Port Mirroring.
Enable or disable the specified port to be a Received Port Mirroring.
Switch Commands
REQUIRED
439