System Information - THOMSON SpeedTouch 605 User Manual

Chapter 5
Expert Configuration

5.2.2 System Information

Overview
Diagnostics
DSL Line Info
Configuration
106
The System Information page is the SpeedTouch™ expert start page. It consists of
four sections:
Diagnostics
DSL Line Info
Configuration
System
Select Diagnostics to view the results of the System Self Test, LAN connectivity and
DSL synchronisation test:
If result is...
Select DSL Line Info to view the current physical status of the ADSL line.
The DSL Statistics allow you to view:
Line Status: this shows whether the DSL link is synchronised (Enabled) or not
(Initialising).
Bandwidth Up/Down: the maximum available bandwidth of the DSL link in
both up- and downstream direction.
Uptime: The duration of the current Enabled Line Status.
kBytes Tx/Rx: the amount of kilobytes (kBytes) sent (Tx) and received (Rx)
since the establishment of the DSL link.
In addition, per configured Internet Service interface you van view:
The interface's currently assigned or configured local WAN IP address
The interface's currently assigned or configured primary (and secondary) DNS
server IP address(es)
In case the negotiation of IP addresses failed, Unassigned or - is displayed
for the applicable interface.
Select Configuration to view the configuration currently active on the SpeedTouch™.
See "5.2.6 System Update" on page 112
Then ...
the overall status of the particular item is healthy.
an error situation has been detected for that item.
for more information.
E-DOC-CTC-20050429-0104 v1.0