Wake-Up Alarm; Alarm/Door Bell - iPECS LIP-9010 User Manual

8.6

Wake-Up Alarm

iPECS-UCP supports an Alarm clock for each station in the system. The
alarm clock can be set to repeat daily or as a one-time alarm.
When responding to the alarm by lifting the handset, BGM will be provided.
In Web admin – System Data – System Attributes – New 5 Wake Up Usage
is set to ON, each station can have 5 Wake Up Setting value.
To set the Wake Up Alarm clock:
 Press the TRANSFER(PGM),
 Dial 41,
 Dial properly by indicating LCD message.
 Press the HOLD(SAVE).
To erase Wake-Up:
 Press the TRANSFER(PGM),
 Dial 42,
 Dial properly by indicating LCD message.
 Press the HOLD(SAVE).
8.7

Alarm/Door Bell

The system can monitor external Alarm or Door Bell contacts:
Alarm Monitor—should the external contact activate, a unique Alarm Ring
signal and LCD display may be received. To restart the monitor circuit, the
external contacts must be deactivated and the Alarm Ring signal terminated.
Door Bell—a unique Door Bell Ring (single tone burst) may be received
each time the external contact is activated. A system contact also can be
assigned to act as a Door Open contact.
To terminate the Alarm signal:
 Dial 565 (Alarm Stop code).
To activate the Door Open contacts:
 Lift the handset,
 Dial Door Open code, #* and contact number 1-4.
56 LIP-9000 Series User Guide - ST