Using Dial By Name And Entering Your Name; Using Automatic Called Number Redial (Acnr) - iPECS LIP-9010 User Manual

4.3.5

Using Dial by Name and Entering Your Name

Dial by Name employs three different Directories: Private directory (Station
Speed dial), Public Directory (System Speed dial), or View Station Name
(Intercom directory).
NOTE
To allow others to contact you via the Intercom directory, you must enter a
name for your station (up to 20 characters).
To place a call using Dial by Name:
 Press the DIR button or Press the SPEED button twice,
 Dial the desired directory,
 1: Private directory,
 2: Public directory,
 3: View Station Name(Intercom Directory),
 The LCD will display the names in alphabetical order,
 Scroll using the Navigation up/down keys, or enter search characters
(refer to the Character Entry Chart in 3.8.3).
 Press the HOLD(SAVE) to place the call.
To enter your station user name:
 Press the TRANSFER(PGM) button,
 Dial 74 (Station User Name code),
 Enter the Name, up to 20 characters (press the DND button to
backspace/delete a character)
 Refer to the 2.2.1Phone Setting
input the station name.
4.3.6

Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is received, the system can
be set to retry the number until the call is connected, the feature is
cancelled, or the maximum number of retries is attempted—this is
Automatic Called Number Redial (ACNR).
For each retry, the system will activate your speaker then place the call with
the microphone muted. When the remote end answers, you must select
the MUTE button, or lift the handset.
LIP-9000 Series User Guide - ST
-Station Name Program about how to
39