Push-To-Talk (Ptt) Page - iPECS LIP-9010 User Manual

If the desired Page Zone is busy, the User can elect to be recalled when
their turn comes in the queue. Users can also request a paged party
answer the Page using Meet-Me Paging. In this case, the paged party may
answer the page from any phone in the system by dialing the Meet-Me
code.
To make a page:
 Lift the handset,
 Dial the desired Page zone,
 If assigned, after page warning tone, make announcement.
To queue for a page when busy is received:
 Press the MSG button,
 Replace the handset returning to idle.
To answer a Meet-me-Page:
 Lift the handset.
 Dial 544 (Meet-Me-Page code).
8.5

Push-To-Talk (PTT) Page

iPECS Phones can be assigned as a member of one or more of the
system's nine Push-To-Talk (PTT) page groups. Users separately log-in or
log-out of any one or all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page announcements to/from other
users who are logged in to the same PTT group.
To log-in to a PTT group:
 Dial #0
 Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
 Dial #0, the PTT Log-in/out code,
 Press the * key.
To place a page announcement to the active PTT group:
 Press and hold the PTT Flex button,
 After confirmation tone, make page announcement.
LIP-9000 Series User Guide - ST 55