Table of Contents
Advertisement
<Maintenance>
The cleaning functions are listed with descriptions. Default settings are marked with a dagger ( ).
<Clean Fixing Assembly>(P. 484)
<Clean ITB>(P. 484)
<Clean Feeder>(P. 484)
<Control Condensation>(P. 484)
<Clean Fixing Assembly>
Clean the fixing assembly after a toner cartridge is replaced or if black streaks appear on printouts.
Fixing Assembly(P. 583)
<Clean ITB>
Clean the transfer belt inside the machine to prevent the print quality from deteriorating.
Belt (ITB)(P. 584)
<Clean Feeder>
Clean the feeder rollers if originals become dirty after being fed through the feeder.
<Control Condensation>
When the temperature changes rapidly in the environment where the machine is installed, condensation occurs, which
may cause fading or bleeding in images and text. Select <On> to remove dew condensation in the machine. When
selecting <On>, specify whether to restrict jobs.
<Off>
<On>
<Use Fax Memory Lock> /<Allow Job Printing During Process>
<Use Fax Memory Lock + Do Not Allow Job Printing During Process>/<Do Not Allow Job Printing During
Process>
<Menu>
Check the message
●
While condensation removal is being performed, printing may not be performed properly and blank paper
may be output.
●
If you set to <On>, you need to keep the machine turned ON to maintain the effect of condensation removal.
Setting Menu List
<Adjustment/Maintenance>
<OK>
Select the item
<Maintenance>
<Control Condensation>
<Yes>
484
1647-0A0
Cleaning the
Cleaning the Transfer
Cleaning the Feeder(P. 580)
<On>
Advertisement
Table of Contents
