Table of Contents
Advertisement
The memory is full. Scanning will be canceled. Do you want to print?
An original could not be scanned due to insufficient memory space.
●
Select whether to print the pages that were scanned or cancel the job.
●
Copy the original in two or more parts.
Not all of the pages could be scanned during sorting and copying.
●
Select whether to print the pages that were scanned or cancel the job.
●
If this is a copy job, either copy the original in two or more parts or change the <Original Type> setting to
<Text/Photo/Map> and then copy the original.
Selecting the Type of Original for Copying(P. 204)
The number of entered characters is incorrect or invalid characters are used.
The network key (the WPA/WPA2-PSK or WEP key) of a wireless router is not entered correctly.
●
Check the network key (the WPA/WPA2-PSK or WEP key) of the wireless router, and set it to the machine
again. For more information about how to check the network key, see the instruction manuals for your
networking devices or contact your manufacturer.
Checking the SSID and Network Key(P. 29)
Setting Up Connection by Selecting a Wireless Router(P. 23)
Setting Up Connection by Specifying Detailed Settings(P. 26)
The USB memory is restricted.
The function that stores a scanned original to a USB memory device is disabled.
●
Set <Use Scan Function> to <On>.
Restricting the Scan to USB Function(P. 412)
The WEP key is not set correctly. Check the WEP settings.
The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.
●
Check the network key (the WEP key) of the wireless router, and set it to the machine again.
Checking the SSID and Network Key(P. 29)
Setting Up Connection by Selecting a Wireless Router(P. 23)
Setting Up Connection by Specifying Detailed Settings(P. 26)
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
●
Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.
Setting Up Connection by Selecting a Wireless Router(P. 23)
Setting Up Connection by Specifying Detailed Settings(P. 26)
Troubleshooting
656
Advertisement
Table of Contents
