Table of Contents
Advertisement
<10BASE-T>
<100BASE-TX>
<1000BASE-T>
<On>
●
When <Communication Mode> is set to <Half Duplex>, you cannot select <1000BASE-T>.
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device.
the MAC Address for Wired LAN(P. 37)
<Use IEEE 802.1X>
Enable or disable IEEE 802.1X authentication.
<Off>
<On>
<Menu>
machine
<Firewall Settings>
Without proper security, unauthorized third parties can access computers and other communication devices that are
connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that
restricts communication to devices with specified IP addresses or MAC addresses.
<IPv4 Address Filter>
Enable or disable settings for filtering packets sent to or received from devices with specified IPv4 addresses.
Specifying IP Addresses for Firewall Settings(P. 371)
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
<Menu>
<Off> or <On> in <Outbound Filter> or <Inbound Filter>
Setting Menu List
*1*2
Configuring IEEE 802.1X Authentication Settings(P. 398)
<Preferences>
<Network>
<Preferences>
<Network>
<Use IEEE 802.1X>
<Firewall Settings>
<Apply>
464
Viewing
Select <Off> or <On>
Restart the
<IPv4 Address Filter>
Select
Restart the machine
Advertisement
Table of Contents
