Send - Canon imageCLASS MF735Cdw User Manual

<Send>
All the settings related to sending faxes and scanned originals are listed with descriptions. Default settings are marked
with a dagger ( ).
<Common Settings>(P. 536)
<Scan and Send Settings>(P. 537)
<Fax Settings>(P. 541)
*
Asterisks ( )
● Settings marked with "
setting items.
● Settings marked with "
or region.
● Settings marked with "
<Common Settings>
Configure the settings to restrict destinations at the time of sending faxes, e-mails, or I-Faxes, and specify the
confirmation method to prevent transmission to wrong destinations.
<Restrict New Destinations>
Select whether to limit the fax numbers and e-mail/I-Fax addresses that can be specified as destinations to
those already registered in the Address Book.
<Off>
<On>
<Restrict Resending from Log>
Select whether to prevent a destination from being selected from the sent job logs.
Previously Used Destinations(P. 407)
<Off>
<On>
<Confirm When Coded Dial TX>
Select whether to display the details of an entered coded dial number when it is selected as a destination.
Displaying Destinations in Address Book(P. 407)
<Off>
<On>
<Confirm Dest. Before Sending>
Specify whether to display the destination confirmation screen when sending faxes, e-mails, or I-Faxes. If <Only
for Sequential Broadcast> is selected, the confirmation screen is displayed only when multiple destinations are
specified. Checking Destinations when Sending Data(P. 408)
<Off>
Setting Menu List
*1
" may not be displayed depending on the model you are using, options, or other
*2
" may be unavailable or vary or have different defaults depending on your country
*3
" cannot be imported or exported.
Restricting New Destinations that Can Be Specified(P. 407)
536
1647-0A5
Disabling Use of