Table of Contents
Advertisement
<Menu>
<Adjustment/Maintenance>
Processing>
●
If you set to <On>, toner may not be fixed sufficiently, resulting in faded printouts.
<Corr. Void on Paper Back Side>
When performing 2-sided printing on thin paper, void may occur on the back side of paper in the leading edge.
In this case, setting this item to <On> may solve the problem.
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Void on Paper Back Side>
●
If you set to <On>, print quality may be affected.
*
<Correct Void>
If printing on thin paper produces void in the leading edge of the paper, setting this item to <On> may solve the
problem.
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
<Correct Void>
●
If you set to <On>, printouts may be faded.
<Drop Pattern Reduction Mode>
If print density is uneven in a way that the print looks like a water drops pattern, setting this item to <On> may
solve the problem.
<Off>
Setting Menu List
<Correct Uneven Gloss>
*
<On>
<Yes>
<On>
<Yes>
478
<Adjust Image Quality>
<On>
<Yes>
<Adjust Image Quality>
<Adjust Image Quality>
<Special
<Special Processing>
<Corr.
<Special Processing>
Advertisement
Table of Contents
