Table of Contents
Advertisement
<Menu>
<Function Settings>
Smoothing>
<Apply to Graphics>
Specify whether to apply smoothing processing to graphics when <Gradation Smoothing> is set to <Level
1> or <Level 2>.
<Off>
<On>
<Menu>
<Function Settings>
Smoothing>
<Apply to Images>
Specify whether to apply smoothing processing to images when <Gradation Smoothing> is set to <Level
1> or <Level 2>.
<Off>
<On>
<Menu>
<Function Settings>
Smoothing>
●
[Gradation Smoothing] in the printer driver applies only to graphics data. The setting configured here
applies to smoothing processing for image data.
<Layout>
Specify the page layout settings such as binding position and margin values.
<Binding Location>
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind
on the long or short edge. Specify the setting of this item in combination with <Gutter>, which specifies the
binding margin to apply to the binding position.
<Long Edge>
<Short Edge>
<Menu>
<Function Settings>
Location>
Select <Long Edge> or <Short Edge>
Setting Menu List
<Printer>
<Gradation Smoothing>
*1
<Printer>
<Apply to Graphics>
Select <Off> or <On>
*1
<Printer>
<Apply to Images>
Select <Off> or <On>
<Printer>
501
<Printer Settings>
Select the item
<Printer Settings>
<Printer Settings>
<Printer Settings>
<Print Quality>
<Gradation
<Print Quality>
<Gradation
<Print Quality>
<Gradation
<Layout>
<Binding
Advertisement
Table of Contents
