Table of Contents
Advertisement
●
If you set to <On>, image quality may be affected or a paper jam may occur when a certain length of time
elapses after printing on the front side or depending on the ambient humidity.
<Rough Surface Paper Mode>
When printing on rough paper, especially when color images are printed too light, select <On>. You can
specify the settings separately for each paper source.
<Multi-Purpose Tray>
<Off>
<On>
<Drawer 1>
<Off>
<On>
*
<Drawer 2>
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
paper source to be set
●
If you set to <On>, the printing speed may be slower or image quality may be affected.
<Env. Flap Closing Prevention>
If envelope flaps cling to the envelope bodies when printing, select <On>.
<Off>
<On>
<Menu>
<Adjustment/Maintenance>
Processing>
●
If you set to <On>, toner may not be fixed sufficiently, resulting in faded printouts.
<Paper Wrinkle Correction>
Printouts may wrinkle depending on the paper to use. In this case, setting this item may solve the problem.
The improvement effect is stronger with <Mode 2> than with <Mode 1>.
<Off>
<Mode 1>
<Mode 2>
Setting Menu List
<Special Paper Processing>
<Apply>
<Yes>
<Special Paper Processing>
473
<Adjust Image Quality>
<Rough Surface Paper Mode>
<Adjust Image Quality>
<Env. Flap Closing Prevention>
<Special
Select <On> in the
<Special
<On>
<Yes>
Advertisement
Table of Contents
