Table of Contents
Advertisement
Connecting Directly (Access Point Mode)
Even in an environment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without difficult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 328)
Connecting Directly(P. 329)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order.
Specifying the value for time until auto termination
●
You can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Direct Connection Termination>(P. 455)
Connecting multiple mobile devices at the same time
●
Configure the machine's SSID and network key arbitrarily.
Linking with Mobile Devices
Check the network settings of the machine.
●
Set the IPv4 address.
Preparing the mobile device
●
Configure settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
●
<Menu>
<Preferences>
<Use Direct Connection> to <On>.
328
Setting IPv4 Address(P. 31)
<Network>
<Direct Connection Settings>
<Access Point Mode Settings>(P. 455)
1647-078
set
Advertisement
Table of Contents
