Table of Contents
Advertisement
<Menu>
<Function Settings>
<On> in <Use Incoming Ring>
●
When <On> is specified, you need to connect your telephone to the machine beforehand.
●
When <Off> is specified, the machine does not enter sleep mode.
<Remote RX>
Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote
Reception). When a fax is sent to the machine, you can receive it just by picking up the handset of the telephone
and entering a specific ID number by using the telephone. This feature can save you the trouble of going all the
way to the machine. For instructions on how to use Remote Reception, see
Faxes (Remote Reception)(P. 228) .
<Use Remote RX>
<Off>
<On>
<Remote RX ID>
00 to 25
to 99
<Menu>
<Function Settings>
<On> in <Use Remote RX>
<Switch to Auto RX>
Specify settings for automatically receiving a fax after the machine has rung for a specified time period. This
feature is only available when <Manual> is selected for the receive mode. By using this feature, faxes can be
received even when no one is available to pick up the handset.
<Use Switch to Auto RX>
<Off>
<On>
<Ring Time Until Auto RX>
1 to 15
to 99 (sec.)
<Menu>
<Function Settings>
RX>
Select <On> in <Use Switch to Auto RX>
Time Until Auto RX>
Setting Menu List
<Receive/Forward>
Enter the desired number in <Number of Rings>
<Receive/Forward>
Enter the ID number in <Remote RX ID>
<Receive/Forward>
<Apply>
550
<Fax Settings>
<Incoming Ring>
Using a Telephone to Receive
<Fax Settings>
<Remote RX>
<Apply>
<Fax Settings>
<Switch to Auto
Enter the desired number of seconds in <Ring
Select
<Apply>
Select
Advertisement
Table of Contents
