Basic Operations for Sending Faxes
This section describes the basic operation procedure used to fax an original.
●
You need to complete some procedures before using fax functions.
Functions(P. 78)
1
Place the original(s).
2
Select <Fax> in the Home screen.
●
If the login screen appears, specify the user name, the password, and the authentication server.
in to Authorized Send(P. 133)
3
Select <Reset> in the Fax Basic Features screen.
●
If the destinations set by the previous user are still selected, this can cause transmission errors. Always reset
the settings before sending.
4
Specify the destination.
Specifying from Address Book
Specifying from Coded Dial Numbers
Entering Destinations Directly
Specifying Destinations in an LDAP Server
Specifying from Address Book
●
You need to register destinations in the Address Book before using this feature.
Destinations(P. 182)
1
Select <Address Book>.
Faxing
Placing Originals(P. 135)
Home Screen(P. 122)
The Address Book enables you to specify a destination by selecting from a list of
registered destinations or by searching by name for destinations with recipient
names.
217
Configuring Initial Settings for Fax
Fax Basic Features Screen(P. 216)
Registering
1647-04R
Logging