Table of Contents
Advertisement
[Local Address]
Click the radio button for the type of IP address of the machine to apply the policy.
[All IP Addresses]
[IPv4 Address]
[IPv6 Address]
[Remote Address]
Click the radio button for the type of IP address of the other devices to apply the policy.
[All IP Addresses]
[All IPv4 Addresses]
[All IPv6 Addresses]
[IPv4 Manual Settings]
[IPv6 Manual Settings]
[Addresses to Set Manually]
If [IPv4 Manual Settings] or [IPv6 Manual Settings] is selected for [Remote Address], enter the IP address to
apply the policy. You can also enter a range of addresses by inserting a hyphen between the addresses.
Entering IP addresses
Entering a single address
Managing the Machine
Select to use IPSec for all IP packets.
Select to use IPSec for all IP packets that are sent to or from the IPv4 address of the
machine.
Select to use IPSec for all IP packets that are sent to or from an IPv6 address of the
machine.
Select to use IPSec for all IP packets.
Select to use IPSec for all IP packets that are sent to or from IPv4 addresses of the
other devices.
Select to use IPSec for all IP packets that are sent to or from IPv6 addresses of the
other devices.
Select to specify a single IPv4 address or a range of IPv4 addresses to apply IPSec.
Enter the IPv4 address (or the range) in the [Addresses to Set Manually] text box.
Select to specify a single IPv6 address or a range of IPv6 addresses to apply IPSec.
Enter the IPv6 address (or the range) in the [Addresses to Set Manually] text box.
Description
IPv4:
Delimit numbers with periods.
393
Example
192.168.0.10
Advertisement
Table of Contents
