Scanning With The Access Point Mode - Canon MG6400 series Online Manual

Scanning with the Access Point Mode

When the machine enters the access point mode, you can scan from an external device such as a computer
or a smartphone without involving an access point.
Important
• Before you use the machine with the access point mode, be sure to specify the access point name of
the machine and the security setting.
Before Using the Machine with the Access Point Mode
1. Make sure that the machine is turned on.
2. Select WLAN on the HOME screen.
LCD and Operation Panel
3. Use the button to select Access point mode, then press the OK button.
4. Check the message that is displayed, then press the OK button.
The machine enters the access point mode.
5. Connect an external device such as a computer or a smartphone to the machine via wireless
LAN.
Perform wireless LAN settings with your external device, then assign the access point name specified for
the machine as a destination.
Note
• For details on how to perform wireless LAN settings with an external device, refer to the device's
instruction manual.
• While the machine is in the access point mode, the access point name specified for the machine is
displayed on the LCD.
When you specify the machine as a destination for wireless connection to an external device,
assign the access point name specified for the machine.
• While the machine is in the access point mode, pressing the right Function button displays the
details on the security setting.
When a WPA2-PSK (AES) passphrase is valid, entering the passphrase is required to connect an
external device to the machine via wireless LAN. Enter the passphrase specified for the machine.
6. Load the original on the platen glass.
7. Start scanning from an external device such as a computer or a smartphone.
Perform scanning operations from the external device and specify the machine as a scanner you use.
219