Registration; Using The Touch Screen; Idle Screen - Yealink SIP-T56A User Manual

Smart Media Phone
User Guide for SIP-T56A
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The touch screen
displays "Welcome Initializing...Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4 network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by default.
Note If your network does not use DHCP, proceed to

Registration

Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T56A smart media phone
supports up to 16 accounts. If your phone is not registered, you may have to register it. For
more information on how to register your phone, refer to

Using the Touch Screen

Idle Screen

The SIP-T56A smart media phone supports multiple idle screens. You can swipe left or right to
switch among different idle screens. The IP phone supports three idle screens by default.
You can add a new idle screen by moving an application or widget to the right side of the third
idle screen. The idle screen will be deleted automatically if there is no application or widget on
the screen. For more information, refer to
34
Basic Network Settings
Account Management
Managing Applications and Widgets
on page 52.
on page 161.
on page 173.