Semi-Attended Transfer - Yealink SIP-T56A User Manual

Smart Media Phone
User Guide for SIP-T56A
Make sure you have an active call and one or more calls on hold, drag one far-site window
-
to another far-site window.
The touch screen prompts the following:
Tap Transfer.
Then the active call is connected to the number of the held party.

Semi-Attended Transfer

Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
To perform a semi-attended transfer:
Press
1.
Do one of the following:
2.
Enter the number you want to transfer the call to.
-
Press
286
or tap the Transfer soft key during a call.
to dial out.
Configuring Transfer Mode via DssKey on page 306.