Blf List - Yealink SIP-T56A User Manual

To perform a new call:
When the transfer mode via Dsskey is set to New Call and there is already an active call on the
IP phone, you can do the following:
Tap the BLF key of the monitored user you want to call.
1.
The phone will dial the number of the monitored user. The original call is placed on hold.
Picking up an Incoming Call of the Monitored User
When the monitored user receives an incoming call, the BLF key icon of the monitored user will
become and flashing. You can use the BLF key to pick up an incoming call of the monitored
user. If you enable visual alert feature on the phone, you can pick up the incoming call using the
DPickup soft key. Before picking up an incoming call, ensure that the directed call pickup code
has been configured in advance.
To pick up an incoming call using the BLF key or the DPickup soft key:
Tap the BLF key or the DPickup soft key.
1.
The incoming call of the monitored user is answered on the IP phone.
Note
If the directed call pickup code is not configured, the phone will place a call to the monitored
user instead of picking up an incoming call of the monitored user when you tap the BLF key
the DPickup soft key

BLF List

You can use the BLF List feature to monitor a list of users defined by your system administrator.
For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,
BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IP
phone can present the status of user1 and user2. The key icons illuminate flashing or solid
depending on the status of those users. For more BLF List key icon, refer to
(associated with BLF/BLF List)
You can use the BLF List keys in the following ways:
When the monitored user is idle, tap the BLF list key to dial out the phone number.

When there is already an active call on the IP phone, you can transfer the active call to the

monitored user by tapping the BLF List key. The phone handles the active call differently
depending on the configuration of the transfer mode via Dsskey with the BLF list key. For
more information on the transfer mode via Dsskey, refer to
DssKey on page 306.
When the monitored user receives an incoming call, tap the BLF list key to pick up the call

directly. Before picking up an incoming call, ensure that the BLF List Pickup Code has been
configured in advance. If the code is not configured, the phone will place a call to the
monitored user instead of picking up the incoming call of the monitored user when you
.
on page 18.
Advanced Phone Features
or
Icon indicator
Configuring Transfer Mode via
309