Yealink SIP-T56A User Manual page 294

Smart Media Phone
User Guide for SIP-T56A
the system (for example, a phone in another office or conference room). You can park an active
call by tapping the call park key on the phone. If the call is parked successfully, the response is
either a voice prompt confirming that the call was parked, or a visible prompt on the touch
screen.
Call park is not available on all servers. Contact your system administrator for more information.
Note
To configure a call park key via phone user interface:
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
1.
Tap Settings->Features->DSS Keys.
2.
Tap the desired line key.
3.
Tap the Type field.
4.
Tap Key Event in the pop-up dialog box.
5.
Tap the Key Type field.
6.
Tap Call Park in the pop-up dialog box.
7.
Tap the Account ID field.
8.
Tap the desired line in the pop-up dialog box.
9.
10. (Optional.) Enter the string that will appear on the touch screen in the Label field.
11. Enter the call park code in the Value field.
12. Tap to accept the change or
Call park key is configurable via web user interface at the path DSSKey->Line Key.
To use call park:
User on phone A places a call to phone B.
1.
User on phone A wants to take the call in a conference room for privacy, and so taps the
2.
call park key on phone A.
User on phone A walks to an available conference room where the phone is designated as
3.
294
to cancel.