Yealink SIP-T56A User Manual page 253

Tap to see the onscreen keyboard, and then you can enter the number using the
onscreen keyboard.
Press
3.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the
You can also tap
then tap the desired entry or contact to place a call.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, swipe
Note
down from the top of the screen or swipe left/right to go to the second idle screen and then tap
Settings->Status. The maximum SIP URI or IPv4 address length is 32 characters. For example, SIP
URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free (speakerphone) mode:
Do one of the following:
With the handset on-hook, press
-
Enter the desired number using the keypad or the dial pad on the touch screen.
Press
With the handset on-hook, enter the desired number using the keypad or the dial pad on
-
the touch screen.
Press
To place a call using the headset:
Do one of the following:
With the optional headset connected, press
-
Tap the line key to obtain a dial tone.
, or tap Send.
or to search for an entry or contact after picking up the handset, and
or tap Send.
, or tap Send.
Key as Send on page 84.
or tap the line key to obtain a dial tone.
to activate the headset mode.
Basic Phone Features
253