Answering Calls - Yealink SIP-T56A User Manual

Smart Media Phone
User Guide for SIP-T56A
Enter the desired number using the keypad or the dial pad on the touch screen.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad or the dial pad on the touch screen.
Press
Note
To permanently use the headset mode, refer to
The SIP-T56A smart media phone can handle multiple calls at a time. However, only one active
call (the call that has audio associated with it) can be in progress at any time. The SIP-T56A
smart media phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T56A smart media phone. To place a new call
during an active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press
- Press
Tap the NewCall soft key.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press
You can tap the desired call, and then tap the Resume soft key to retrieve it.
If multiple accounts are registered on the phone, you can first tap the desired line key on the idle
Note
screen or tap the desired line from the status bar in dialing screen, and then you can use the
selected account to place a call.

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

254
or tap Send.
or tap Send.
or tap Send.
or tap the Hold soft key to place the original call on hold.
or tap Send.
to activate the headset mode.
Headset Prior on page 128.